Trixbox – Asterisk 1.4 & FreePBX 2.3.0 – w00t
We’re going to cover a lot of ground, this ‘guide’ assumes you at least know what linux is and hopefully at least used it once or twice.
The intention here is a complete walk thru to get a Trixbox system (2.2 or higher) up an running for a home setup. Some hardware/software you might want:
Sipura 2000 (you can still find them some places, if you can’t the Linksys PAP2-NA should work just fine assuming you get an unlocked one)
You will want an old clunker PC that has a CDROM and a hard drive you can format. The only thing it should require in the end is something a little faster than 500mhz, one power cord, and one network cord.
You will also want a cheap headset or microphone to test with your computer.
Your going to want some sort of SSH client. I use SSH Secure Shell from www.ssh.com (direct link). Putty will work fine as well.
